Whole-Home Repiping in Kilgore, TX

What's Included in Our Whole-Home Repiping Service

• A full assessment of your existing supply lines and their material before we quote
• A planned pipe route that opens the least wall and floor possible
• New PEX or copper supply lines throughout, your choice where code allows
• Protection of floors, furniture, and belongings in the work area
• Water staged off for the shortest possible window, not the whole project
• A full pressure test of the new system before service is restored
• Drywall patch and finish coordination built into the project plan
• A written, itemized quote before the project begins

Why galvanized pipe fails in older Kilgore homes

Galvanized steel was standard in the homes the Daisy Bradford boom threw up fast in the 1930s. Decades later, the zinc coating is gone and the steel corrodes inward, narrowing the bore and shedding rust into your water. No repair reverses that — once a galvanized system starts failing, patching one section just moves the next leak down the line. Replacement is the durable fix.

You can see the failure in the symptoms. The narrowing bore is why your pressure drops, especially on the hot side and especially when two fixtures run at once — the effective pipe diameter has shrunk to a fraction of what it was. The rust shedding off the pipe wall is why the water runs brown after the house sits, and why it tastes metallic. Those are not separate problems; they are one aging system telling you it is done.

Patching a galvanized system is a losing game. Cut in a new section and you have joined fragile old pipe to new — the corrosion simply surfaces at the next weak point, and you are back with a wrench in a few months. That is why we recommend a full repipe rather than chasing leaks one at a time on a system that has reached the end.

• PEX for flexibility, freeze resistance, and fast installation
• Copper where you prefer it or code requires it
• Minimal-access routing to limit wall opening
• Drywall patch and finish coordination included in the plan

What a repipe looks like day to day

We map the runs, isolate the work, and stage it so your water is off for the shortest possible time. Most single-family homes are repiped in one to two days. We pressure-test the new system, restore service, and walk you through the access points before patching. It is disruptive for a short window and permanent afterward.

The part homeowners worry about most is the wall opening, and it is more controlled than people expect. We plan the route to reach the lines through as few, as small openings as possible, and we protect the rooms we work in. You are not living in a construction site for a week — for most homes it is a day or two of focused work, then patching.

We keep you in water as much as the job allows. Rather than shutting the whole house off for the duration, we stage the work so the shutoff windows are short and predictable, and we tell you when they are coming. You get a straight schedule, not an open-ended disruption.

PEX or copper — how we help you choose

Both are excellent, and the right answer depends on your home and your preference. PEX is flexible, which means fewer joints and faster installation; it resists freeze damage better because it can expand slightly; and it is cost-effective, which keeps the whole project more affordable. For most Kilgore repipes it is the practical choice, and it is what we run most often.

Copper is time-proven and some homeowners simply prefer it, and there are spots where code or exposure calls for it. It costs more in both material and labor because every joint is soldered. We walk through the trade-offs for your specific home — layout, budget, code, and how long you plan to stay — and let you make the call with the real differences in front of you rather than a default.

• PEX: flexible, freeze-resistant, fewer joints, faster, more affordable
• Copper: time-proven, preferred by some, required in certain spots
• We match the choice to your layout, budget, and code — not a house default

What affects your repipe cost

A whole-home repipe is priced on the size of the house, the number of fixtures and bathrooms, the material you choose, and how accessible the runs are. A single-story home with an open crawl space is more straightforward than a two-story with finished walls everywhere, and PEX generally comes in below copper. Drywall patching is part of the honest number, which is why we build it into the quote rather than leaving it as a surprise.

Related planning ranges give a sense of the components — pipe rerouting runs $577–$1,236 and main-water-line repair $379–$3,035 in published Kilgore benchmarks — but these are planning ranges, not a whole-home quote. A full repipe is its own scope, and we price it after we have seen your home, walked the route, and counted the fixtures. You get an itemized written quote before any commitment.

Our Whole-Home Repiping Process

1. 1

   Assessment and quote

   We confirm the existing pipe material, map the fixture count and layout, and identify the smartest route for new lines. You get an itemized written quote — including drywall coordination — before any commitment.

2. 2

   Plan and protect

   We plan the access points to open the least wall and floor possible, then protect your floors, furniture, and belongings in the work zone before anything is opened.

3. 3

   Run the new lines

   We install fresh PEX or copper supply lines along the planned route, isolating the work and staging it so your water is off for the shortest possible time rather than the whole job.

4. 4

   Pressure test

   Before anything is closed up, we pressure-test the entire new system to confirm every joint holds and every fixture gets full, consistent flow.

5. 5

   Restore and walk through

   We restore service, walk you through every access point we opened, and confirm the water runs clean and strong at each fixture before the patching stage.

6. 6

   Patch and document

   Drywall patching is coordinated as part of the plan so you are not left with a wall full of holes, and you get documentation of the new system for your records and any future sale.

Whole-Home Repiping Near You

We provide whole-home repiping across Kilgore and East Texas, including Longview, White Oak, Gladewater, Overton, and Liberty City. Not sure if we reach you? See all service areas or call (831) 290-4327.

Whole-Home Repiping FAQs